DK-Q770 strong degumming agent a: nature degumming agent is a single component solvent, effective removal of epoxy resin, phenol resin, acrylic resin, polybutadiene, melamine and other polymer-based coating and by ring epoxy glue, adhesives, potting and cured parts. Volatile fast, dissolution and excellent cleaning power. No damage to metal, but plastic is corrosive. Two: Use for jewelry, signs, electronic, electrical parts for the repair of various products with bul defective products and cleaning tools. Proper use of this product, which can effectively reduce the defective products. Three: Use 1, when using the degumming agent into the container, then add in the degumming agent one centimeter thick cover for fire prevention water evaporation. Will be required to remove the coating of parts completely immersed in degumming agent, coating thickness varies, ranging from a few minutes or tens of minutes, coating and adhesive potting material will be removed automatically all. After removal of water and rinse. 2, resin filter net after degumming agents available filters will take off, you can continue to use multiple times. 3, brushing inconvenient for large objects soak, brush can be used to remove the paint applied to need parts, a few minutes or tens of minutes after the film has to muster their wash to clean off, for thick film coating can brushing several times. Four: storage and Notes 1, the product is solvent-based, volatile and skin irritation. In order to avoid inhalation and skin contact should operate ventilation and wear protective gloves, masks and glasses shield. 2, skin contact, wash immediately with plenty of water and soap to use. If not, please hospital. 3, only for industrial use, users must be trained, and this product is stored tightly closed container cool, dry and ventilated place. Disclaimer: This manual only and does not constitute a guarantee statement, can not be considered a technical indicator derived from internal testing and customer experience. While we believe this information is reliable, but because of the many factors that affect the adhesive properties, it is not necessarily committed to this product for a particular customer requirements. Therefore, the customer should be fully tested in order to determine whether this product is suitable. Shenzhen Electronic Technology Co. Dekun change this leaflet reserved the right to make the content without notice. Does not assume the use of a particular case Dekun problem with the product, not liable for any direct, indirect, incidental damages.